Automotive

Description: The KC ESD-15 tweezer is a precision anti-static tool crafted for handling small, sensitive electronic components without causing electrostatic discharge (ESD) damage. Constructed from stainless steel with a conductive coating, it features a curved fine tip that allows accurate gripping in tight or awkward locations on PCBs or other assemblies. Its ergonomic spring-action arms give the operator good tactile feedback while minimising fatigue during repeated use. The ESD-safe design ensures that static charge is dissipated, protecting delicate semiconductor and surface-mount parts during repair, assembly, or inspection tasks. Features : ESD-safe/anti-static construction to protect sensitive electronics Stainless steel body (often with conductive or dissipative coating) Curved fine tip for precision grip in tight areas Spring-action arms for controlled opening and closing Good tip alignment and fine point for accurate part handling Lightweight design for comfort over extended use Corrosion-resistant finish Suitable for SMD/SMT work, PCB repair, electronics assembly

Description & Features: The KC / Koocu ESD-11 is an anti-static (ESD safe) stainless steel tweezer, built for handling sensitive electronic components without damaging them via static discharge. (It carries a coating to dissipate charge.) It is nonmagnetic and resistant to corrosion (e.g., acids), so it is durable in many work environments. The tips are finely pointed (sharp) for precision work, often straight tips (rather than curved). The design ensures tip alignment and stability even after prolonged use. Suitable for electronics repair, SMD/SMT work, micro-mechanical tasks, jewelry, etc.

Description: The KC 8063 Toolkit is a compact precision screwdriver and bit set intended for electronics repair, device maintenance, and fine mechanical tasks. It packs multiple interchangeable bits—such as Pentalobe, Phillips, Torx, Tri-point, and cross bits—into a single portable carry case, making it suitable for mobile devices, laptops, smartphones, and other delicate assemblies. The bits are often made from a durable alloy (e.g., titanium or hardened steel) to resist wear, and the set is organised in a way that makes bits easy to access and store. The handle is typically structured for ergonomic grip and torque transfer, and the case ensures safe transport without losing small parts. Features: Multi-bit precision screwdriver set (e.g. Pentalobe, Phillips, Torx, Tri-point, cross bits) Bits made of a hardened alloy (often titanium or steel) Interchangeable bits with magnetic or friction retention in the driver Compact carrying case for portability and protection Bits organized and secured to avoid falling out Ergonomic screwdriver handle for comfort in precision tasks Suitable for repairing electronics, smartphones, laptops, etc.

Description: The KC 8172 Toolkit is a compact precision repair kit designed for mobile phones, tablets, laptops, and other delicate electronic devices. It provides all the essential tools required for opening and servicing small gadgets with ease and safety. The toolkit is lightweight and portable, featuring a sturdy storage case that keeps each component organised for quick access. Its ergonomic screwdriver handle allows a comfortable grip, while the high-quality bits ensure durability and resistance to wear. This set is suitable for both professional technicians and DIY users who need a reliable solution for fine electronic repair work. Key Features: 8-in-1 compact precision repair set Includes ergonomic screwdriver handle with non-slip grip Multiple interchangeable bits for different screw types High-strength steel bits for durability and precision Magnetic bit holder to secure small screws during use Compact and lightweight case for easy storage and portability Organized inner layout to keep tools secure and accessible Ideal for mobile phones, tablets, cameras, and other electronic devices

Description: The KC 6666 Toolkit is expected to be a small precision repair toolkit meant for electronics, small gadgets, mobile phones, laptops, cameras, and other fine mechanical devices. It probably includes a compact carrying case and a variety of interchangeable bits and tools that allow you to open and repair sensitive devices with accuracy. Features: Interchangeable screwdriver bits to support different screw head types (e.g., Phillips, flat, Torx, pentalobe) Main screwdriver/bit holder, possibly with a magnetic tip to hold small screws Compact case or box for organizing bits and tools Bits made of hardened steel or durable metal alloy to resist wear and maintain precision A layout inside case (slots / foam / plastic mold) to keep bits secure and prevent loss Portability — designed to be lightweight and easy to carry Usability for precision electronic repair — suitable for phones, laptops, small appliances A non-slip grip or ergonomic handle for better control

Description: A 6-in-1 mobile opening tool kit is designed for safely disassembling and servicing phones, tablets, and other compact electronic devices. It includes multiple small tools such as pry bars, spudgers, picks, and screwdrivers that allow you to gently open housings, lift screens, detach flex cables, and manipulate small components without damaging delicate parts. The tools are typically made of metal or reinforced plastic, often with non-slip grips or dual-ended designs, to provide precision, control, and durability in tight spaces. Features: Includes six different tools (or six functions), such as:  • Pry bars / spudgers (flat, thin edges)  • Metal or plastic picks  • Screwdriver bits (common types for phones)  • Suction cup (for lifting screens)  • Flexible or angled blades Dual-ended tools: many implements have two usable ends for different tasks Made from hardened metal (stainless steel) or reinforced plastic to resist bending or breaking Slim profile and fine edges for inserting between screen and frame Non-slip handle or textured grip for control Lightweight and compact for portability Can reach into corners or small gaps without scratching or damaging surfaces Reusable — tools designed for repeated use, not disposable

Description: The KC 1.5 Heat Tape is a self-adhesive, high-temperature resistant tape used for heating applications. It is designed to adhere to surfaces and provide thermal bonding or heating over that area. It can be applied to pipes, metal surfaces, or places where localised heating is needed. The tape sustains high temperatures, sticks firmly without lifting, and is made to leave minimal residue when removed. According to one listing, it resists up to 260°C and maintains adhesion under thermal stress. Features: High heat resistance (up to ~260 °C) Strong adhesive backing that resists curling or lifting Leaves little or no residue after removal Suitable for use on surfaces that require durable heat contact Flexible enough to conform to curves or irregular surfaces Durable under repeated heating cycles

Description: The KC Heat Tape 2.0 is a specialised adhesive heating/high-temperature tape designed for thermal applications such as securing heating wires, insulating surfaces, or providing localised heating control. It consists of a heat-tolerant substrate material (e.g., polyimide, silicone, fibreglass, or similar) with a heat-resistant adhesive backing. The tape adheres to pipes, metal, electronic components, or other surfaces and maintains contact even under high thermal stress. Its design is intended to manage heat transfer, protect adjacent surfaces from overheating, and allow safe operation in high-temperature environments. The “2.0” designation may refer to a version, width, or performance tier of the tape Features: Heat-resistant substrate material (polyimide, silicone, or reinforced film) Strong adhesive backing that maintains adhesion under elevated temperature Low residue removal—peels off cleanly without leaving adhesive behind Ability to conform to curved or uneven surfaces (good flexibility) Stability under repeated thermal cycles (resists curling, delamination) Insulating properties to isolate heat from sensitive adjacent components Compatible with high temperatures—able to endure short-term and long-term heat exposure Thin profile to minimize bulk while still performing thermal tasks Durability—resistant to wear, oxidation, or breakdown under heat

Description: The KC K116 / KOOCU K-116 Power Boot Cable is a specialised tool cable used for “booting” iOS / Android devices in repair mode, supplying power during diagnostic or repair operations. It enables a technician to power the device and simultaneously perform tasks like firmware flashing, diagnostics, or board-level repair. The cable commonly supports multiple device types (iPhone, Android, etc.) and integrates protection and automatic cut-off to prevent overheating or over-voltage. Features: Multi-platform support: compatible with iPhones (6 series up to latest) and many Android models Built-in protection: anti-over-voltage/over-current safeguard (automatic cut-off or limiting) Plug & play: minimal configuration needed — just connect and use High-quality internal wiring: often uses pure copper conductors for better conductivity and reduced voltage loss Compact & portable: lightweight cable design for ease of use on the bench Durable connectors: robust connector ends to withstand repeated insertion/removal Integrated “boot” feature: able to power the device in low-power/pre-boot states (useful in diagnostics or repairs)

Description: A **KC Jumper Wire** is a fine conductor wire used primarily for making electrical connections on circuit boards, in repair work, prototyping, or micro-soldering tasks. It connects two points in an electronic circuit without requiring a full cable harness or connector. Jumper wires are widely used for component repair, wire bridges, bypassing broken traces, or rerouting signals during diagnostics and fixes. The “KC” prefix likely refers to a brand or series of jumper wires used in mobile or chip-level repair. Features: * Ultra-fine diameter conductor for minimal intrusion — often measured in micrometers * High conductivity (pure copper or copper alloy) to ensure low resistance * Flexible insulation to allow bending and routing in tight spaces * Thin insulation layer to reduce bulk while still providing electrical isolation * Some variants may be tinned or coated for better solderability * Good tensile strength to avoid breaking during handling * Suitability for micro soldering or chip-level repair * Clean removal/minimal residue if insulation needs stripping * Compatibility with surface-mount/fine-pitch circuits

Description: The KC Wick Wire 2015 is a high-quality desoldering braid designed for efficient removal of excess solder from electronic circuit boards. Made from fine-stranded pure copper coated with flux, it quickly absorbs molten solder through capillary action, leaving pads and components clean without damaging delicate PCB tracks. The braid is flexible, easy to position on tight joints, and comes neatly wound on a spool for controlled dispensing. It is widely used in electronics assembly, rework, and repair for precise and safe solder removal. Key Features: * Width: 2.0 mm suitable for most PCB solder pads * Length: 1.5 m roll for extended use * Made of high-conductivity copper braid for fast solder wicking * Flux-coated to enhance solder absorption and improve cleaning efficiency * Flexible and flat braid design to reach tight or narrow solder joints easily * Provides clean and residue-free solder removal without damaging PCB pads * Supplied on a compact spool for convenient storage and easy feed-out * Ideal for electronics repair, rework, and precision solder cleanup

Description: KC Wick Wire 2015 CP is a desoldering braid (wick) used to remove excess solder from circuit boards by capillary action—i.e., the braid soaks up molten solder when heated. The braid is made of fine copper wire and is flux-impregnated (RMA or similar non-chlorine flux) to aid solder flow and absorption. Features: * High thermal conductivity copper braid for rapid heat transfer and efficient solder absorption * Flux-coated to reduce surface tension and enhance solder wicking * Flexible braid that conforms to the surface to make good contact with soldered areas * Safe for use on precision PCBs (by virtue of fine width and controlled action)

Description: The **KC Knife 9307** is a fine utility/precision cutting tool designed for electronic repair, craft, and micro-work. It is intended for tasks like removing adhesive or glue from PCB surfaces, trimming film and plastic layers, scraping off residue, and making clean micro cuts. The blade is sharp and replaceable (or changeable) so that delicate components are not damaged. The handle is designed for control and fine handling, especially in tight spaces on mobile phones or small circuits. Features: * Sharp blade suited for fine cutting, scraping, engraving, and trimming * Slim and precise tip to reach narrow/tight areas * Ergonomic handle for control and stability * Replaceable or interchangeable blades (common in such knives) * Lightweight for ease of maneuvering * Useful for removing adhesives, cleaning surfaces, cutting films or plastic layers * Works on materials like glue film, plastic sheeting, thin films, textiles, etc. * Safe and delicate cutting aimed for electronics / small components

Description: The KC BS02 Brush is a dual-ended antistatic/ESD-safe cleaning brush designed for electronics repair and PCB work. One end has fine bristles for delicate cleaning, and the other has more rigid bristles for tougher residue or glue removal. It’s used to clean dust, flux, glue residues, and other particles from motherboards, chips, connectors, and small components without damaging circuits. Features: * Dual-ended design: one softer brush head and one harder/metal or stiffer head for varied cleaning tasks * Antistatic / ESD-safe build to protect sensitive electronics during cleaning * Durable bristles that resist deformation and shedding * Slim and ergonomic handle for precision control * Useful for cleaning PCBs, IC pads, removing glue, dusting components * Compact and portable — easy to include in repair kits * Safe for repeated use in electronics environments

Description: The KC BS11 Brush is an anti-static/ESD-safe cleaning & glue-removal brush designed for electronics repair, especially for motherboards, chips, circuit boards, and removing adhesive or residue. It typically has dual heads (soft brush + stiffer wool/steel wool/wire side) to handle both delicate cleaning and tougher glue/detinning work. The handle is often made of aluminium alloy with a sponge or EVA grip for comfort. The brush is meant for cleaning PCBs, IC pads, glue around chips, residue removal, and general maintenance of electronic boards. Features: Anti-static / ESD-safe construction to prevent damaging sensitive electronics Dual-ended design: soft PP bristles on one side, fine steel wool or wire/stiffer brush on the other for glue removal, detinning, etc. Temperature-resistant bristles/steel wool side that resist deformation even under heat (when used with hot air or soldering) Handle made of aluminum alloy with sponge/EVA sheath for comfortable grip and insulation PP material (plastic) brush section with good elasticity, minimal shedding of fibers Tight steel wire/fine steel wool construction to reach narrow gaps and remove glue or residual tin effectively Good balance so one can use either side depending on delicacy of the job.

Description: The KC 1600X Mini Microscope is a compact, digital USB microscope designed for close-up inspection of electronics, circuit boards, small components, and detailed surfaces. It allows users to view magnified images of tiny objects on a computer or mobile screen. The device comes with an adjustable stand, integrated lighting, and plug-and-play connectivity via USB, making it useful for technicians, hobbyists, students, and repair professionals. According to a listing, it offers magnification up to 1600× for detailed observation of solder joints, traces, micro-components, and PCB defects. It is marketed for applications such as electronics repair (PCB inspection, micro-soldering), biological sample viewing, hobby/craft work, and general magnification tasks. Key Features: * Digital magnification up to 1600× (digital zoom) * Integrated LED lighting (usually 8 LEDs) around the lens to illuminate the subject. * Adjustable metal/mechanical stand or holder to position the microscope at different heights and distances * USB interface (USB 2.0 / USB-C or via adapter) for connecting to PC, Android (OTG), or other devices * Real-time imaging, capture of photos & video via software/app * Plug & play functionality (no complex setup) * Compact and portable design suitable for workspace/lab use * Suitable for both electronics inspection and other magnification tasks (coins, stamps, biological specimens, etc.)

Description: The KC 1600X Mini Microscope is a compact, digital USB microscope designed for close-up inspection of electronics, circuit boards, small components, and detailed surfaces. It allows users to view magnified images of tiny objects on a computer or mobile screen. The device comes with an adjustable stand, integrated lighting, and plug-and-play connectivity via USB, making it useful for technicians, hobbyists, students, and repair professionals. According to a listing, it offers magnification up to 1600× for detailed observation of solder joints, traces, micro-components, and PCB defects. It is marketed for applications such as electronics repair (PCB inspection, micro-soldering), biological sample viewing, hobby/craft work, and general magnification tasks. Key Features: * Digital magnification up to 1600× (digital zoom) * Integrated LED lighting (usually 8 LEDs) around the lens to illuminate the subject. * Adjustable metal/mechanical stand or holder to position the microscope at different heights and distances * USB interface (USB 2.0 / USB-C or via adapter) for connecting to PC, Android (OTG), or other devices * Real-time imaging, capture of photos & video via software/app * Plug & play functionality (no complex setup) * Compact and portable design suitable for workspace/lab use * Suitable for both electronics inspection and other magnification tasks (coins, stamps, biological specimens, etc.)

Description: The KC HD31 is a professional digital inspection microscope equipped with a large 10.1-inch HD display for real-time viewing without the need for a computer. It offers **continuous magnification from 50× to 1500×, allowing clear visualisation of tiny components on circuit boards, jewellery, coins, and other small objects. The unit features adjustable **LED illumination** for bright, shadow-free imaging and is mounted on a **sturdy adjustable stand** with a wide metal base for stability during work. It supports still image capture and video recording, making it suitable for electronics repair, quality inspection, teaching demonstrations, and hobby use. Key Features * 10.1-inch built-in HD display for direct viewing * 50× – 1500× continuous magnification range * Adjustable high-intensity LED illumination for clear focus * Sturdy metal stand with height-adjustable holder for precise focusing * HD image and video capture capability with storage support * Wide working space under the lens for handling larger circuit boards * Easy plug-and-play operation with intuitive controls * Suitable for PCB inspection, soldering work, gem and coin analysis, and other fine-detail tasks

Description: The KC 4004 Cloth Wiper is a soft, lint-free cleaning cloth or pad designed for delicate electronic and optical surfaces. It’s used in repair and maintenance environments to wipe away dust, fingerprints, flux residues, and smudges from components like screens, lenses, circuit boards, and glass without scratching. The cloth typically has a smooth, non-abrasive texture and is constructed from microfibre or similar fine fabric to avoid leaving fibres. It’s compact, flexible, and easy to handle or cut to size as needed. Features: * Lint-free, non-abrasive surface ideal for sensitive surfaces * Soft microfiber or finely woven fabric that won’t scratch * Good absorbency to remove oils, residues, moisture * Can be used dry or slightly damp (with cleaning solution) * Flexible and thin, suitable for tight or small spaces * Durable and washable for repeated use * Compact / easy to store or carry in tool kits * Safe for use on glass, LCDs, camera lenses, circuit boards, and precision instruments

Description: The KC 1004 Cloth Wiper is a soft, non-dust, lint-free cleaning cloth designed for delicate electronics and optical surfaces. It safely removes fingerprints, dust, smudges, and residues from phone LCDs, tablets, camera lenses, circuit boards, and other sensitive components without scratching or leaving fibres behind. The cloth is lightweight, anti-static, and made for repeated professional use in repair shops and maintenance kits. Key Features: * Lint-free, non-dust microfiber-type fabric for sensitive surfaces * Anti-static and non-abrasive to protect delicate screens and components * Effective for removing oil, dust, flux residue, and moisture * Soft texture ensures scratch-free cleaning * Washable and reusable for extended use * Flexible and thin enough to reach corners and tight spaces * Suitable for mobile screens, cameras, glass panels, and circuit boards * Lightweight and easy to store or carry in repair kits